How to Focus QH Bulb for Adjustable Focused Spotlights

***Spotlights Manufactured after August 2018***



Step 1 – Remove reflector from case (see ‘How To Remove Reflector for Spotlights’ Steps 1 & 2)

Step 2 – Unscrew the bulb holder from the back of the reflector

Step 3 – Take out old bulb from ceramic base bulb holder

Step 4 – Fit the 2 pins of the new bulb into the ceramic base bulb holder
* Do not touch the bulb with your hands, we suggest using the cardboard box it comes in to avoid leaving finger prints
 * Keep it nice and level as you fit it all the way to the bottom of the bulb holder

Step 5 – Screw in the bulb holder a couple of turns back into the reflector

Step 6 – Screw the locking ring on behind the bulb, keeping it loose until you have focused the beam
* Make sure the small cut out on the locking ring is aiming towards the back of the reflector



Step 7 – Plug spotlight into a power source

Step 8 – Check the beam against a flat wall to view the beam shape

Step 9 – Screw bulb inwards in a clockwise direction until you get your desired beam focus
* Screw inwards for a more tighter spot
* Screw outwards for a wider spread

Step 10 – Hold bulb in its position and tighten locking ring by hand as much as possible to lock in the desired beam focus

Step 11 – Re-check light beam is okay

Step 12 – Turn power source off

Step 13 – Re-fit reflector into the case (see ‘How To Remove Reflector for Spotlights’ Steps 6, 7 & 8)


No posts found

Write a review