How to Focus Xenon HID Bulb for Adjustable Focused Spotlights

***Spotlights Manufactured after August 2018***



Step 1 – Make sure the HID bulb is the correct wattage for your HID Ballast!

Step 2 – Remove reflector from case (see ‘How To Remove Reflector for Spotlights’ Steps 1 & 2)

Step 3 – Unscrew the old bulb from the back of the reflector

Step 4 – Screw in the new bulb a couple of turns

Step 5 – Screw the locking ring on behind the bulb, keeping it loose until you have focused the beam
* Make sure the small cut out on the locking ring is aiming towards the back of the reflector



Step 6 – Plug spotlight into a power source

Step 7 – Check the beam against a flat wall to view the beam shape

Step 8 – Screw bulb inwards in a clockwise direction until you get your desired beam focus
* Screw inwards for a more tighter spot
* Screw outwards for a wider spread

Step 9 – Hold bulb in its position and tighten locking ring by hand as much as possible to lock in the desired beam focus

Step 10 – Re-check light beam is okay

Step 11 – Turn power source off

Step 12 – Re-fit reflector into the case (see ‘How To Remove Reflector for Spotlights’ Steps 6, 7 & 8)


No posts found

Write a review